Preparation and application of novel polymer nanoparticles in the detection of copper ion and cysteineEI北大核心CSCD

A novel amphiphilic copolymer,dipropenoxystyrene anthracene and acrylic acid copolymer（BASA-AA） was designed and synthesized based on divinyl anthracene. The polymer self-assembled rapidly in water to create polymer nanoparticles（BASA-AA NPs）with a uniform size of 45 nm,no dye leakage,and great brightness（Φ= 36%）. Because of the enormous number of carboxyl groups on the surface of the particles,it can disperse extremely well in water,and can be used for the rapid detection of copper ion and cysteine（Cys）in pure water, with the limit of detection of 45 nmol/L. The fluorescent intensity of the nanoparticles will be greatly reduced after the introduction of copper ion,realizing the detection of copper ion with high selectivity and sensitivity. A composite probe made of BASA-AA NPs and copper ion can detect Cys in the range of 0.1-10 µμmol/L,with the detection limit of 84 nmol/L,due to the high binding capacity of the sulfhydryl group and copper ion. The method is simple and rapid in material synthesis and preparation,and shows high selectivity and sensitivity in pure water. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

Determination of lanthanum and cerium in cmsx-4 nickel-based superalloys by inductively coupled plasma mass spectrometryEI北大核心CSCD

CMSX-4 is the second-generation nickel-based single crystal superalloy used widely in the world. The oxidation resistance and corrosion resistance of CMSX-4 alloy can be improved by adding trace lanthanum (La), cerium (Ce) and other rare earth elements. A method for the simultaneous determination of La and Ce in CMSX-4 nickel-based superalloy by wet dissolution-inductively coupled plasma mass spectrometry was established. The sample was heated and dissolved under normal pressure by aqua regia and hydrofluoric acid, and the interference of fluorine ion was eliminated by using perchloric acid. The amount of dissolved acid and the digestion conditions were optimized. The limits of detection were 0.23 μg/g for La and 0.85 μg/g for Ce under optimized conditions. The spiked recoveries were 95.0%–98.9% with the relative standard deviations of 1.3%–3.9%, which can meet the requirements of accurate and rapid determination of La and Ce in CMSX-4 nickel-based superalloy. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

A fluorescence enhanced probe for sulfur dioxide detection and fluorescence imaging in living cellsEI北大核心CSCD

基于香豆素和苯并吡啶基团,构建了用于二氧化硫(SO_(2))高效检测的荧光探针P1,其化学结构通过核磁氢谱(^(1)H NMR)、碳谱(^(13)C NMR)和高分辨质谱(HR-MS)确证。在缓冲溶液体系中,单独的探针P1具有微弱的荧光,识别SO_(2)后荧光发射强度明显增强,能够实现对SO_(2)的专一性裸眼识别,检出限为126 nmol/L。生物应用实验结果表明,该探针具有较低的细胞毒性,可用于生物活细胞中外源性SO_(2)的荧光成像。     

Synthesis of FeS2/CoS heterostructure microspheres as anodes for high-performance Li-ion batteries

Journal of Solid State Electrochemistry - FeS2/CoS and FeS2/CoS/C composites were synthesized by solvothermal method and following vapor phase vulcanization at mild temperature with binary oxide...     

Highly Selective Transmembrane Transport of Exogenous Lithium Ions through Rationally Designed Supramolecular Channels

Lithium ions have been applied in the clinic in the treatment of psychiatric disorders. In this work, we report artificial supramolecular lithium channels composed of pore-containing small aromatic molecules. By adjusting the lumen size and coordination numbers, we found that one of the supramolecular channels developed shows unprecedented transmembrane transport of exogenous lithium ions with a Li⁺/Na⁺ selectivity ratio of 23.0, which is in the same level of that of natural Na⁺ channels. Furthermore, four coordination sites inside channels are found to be the basic requirement for ion transport function. Importantly, this artificial lithium channel displays very low transport of physiological Na⁺, K⁺, Mg²⁺, and Ca²⁺ ions. This highly selective Li⁺ channel may become an important tool for studying the physiological role of intracellular lithium ions, especially in the treatment of psychiatric disorders.     

Surface modification of polycarbonate urethane by grafting polyethylene glycol and bivalirudin drug for improving hemocompatibility

As the clinical demand for blood-contacting materials increases, higher requirements are placed on their physicochemical properties, durability and hemocompatibility in vivo. In this work, a multiple functionalized material was developed through a facile modification process. Herein, polycarbonate urethane (PCU) surface was co-modified with polyethylene glycol (PEG) and bivalirudin (BVLD). PCU provides excellent physical and mechanical properties, PEG and BVLD, especially BVLD, enable the surface with outstanding anticoagulant capacity. Specifically, PCU surface was first treated with hexamethylene diisocyanate to introduce active isocyanate groups onto the surface, followed by hydroxy-PEG grafting to improve the hydrophilicity. Finally, BVLD was immobilized on the surface via Michael addition reaction to improve antithrombotic properties. Attenuated total reflection Fourier transforms infrared spectroscopy and UV spectrophotometers were used to confirm the modified surfaces. The hydrophilicity was characterized by static water contact angle measurement, the morphology of the modified surfaces was observed by scanning electron microscopy. Blood compatibility of the modified surfaces was characterized by the hemolysis rate, platelet adhesion assay and cell culture test. The results showed that the BVLD immobilized surface has excellent anticoagulant properties, good fibrin-bound thrombin inhibition, and good resistance against non-specific adhesion of proteins. Hence, the co-modification with PEG and BVLD was proved an encouraging strategy for improving hemocompatibility.     

Radiation-sensitive nanogel-incorporated Fricke hydrogel dosimeters with reduced diffusion rates

Fricke gel dosimeters have great potential for three-dimensional (3D) dose verification in radiation therapy; however, they suffer from time-dependent ion diffusion after irradiation, severely affecting their stability and reliability. In this work, a pullulan-based amphiphilic molecule was synthesized, characterized, and self-assembled into nanogels. Nanogel structures were embedded into gel dosimeters to reduce the diffusion rates, and radiation-sensitive nanogel-incorporated Fricke hydrogel nanocomposites were prepared successfully. The results demonstrated that the diffusion coefficient of improved dosimeters was reduced to 0.125 ± 0.001 mm² h⁻¹, while maintaining the high optical dose sensitivity (0.0410 ± 0.0004 Gy⁻¹ cm⁻¹). It provides a powerful tool toward the practical application of 3D dosimeters.     

Facile synthesis of ordered mesoporous molybdenum carbide electrocatalysts for high-performance hydrogen evolution reaction

In this study, a simple method was designed to prepare ordered mesoporous carbons embedded with molybdenum without any extreme conditions. We prepared three different ordered molybdenum carbide materials with mesoporous structures to explore the influence of the structure of molybdenum-based materials on the HER catalytic efficiency. The ordered mesoporous molybdenum carbide catalysts (CMK-3-MoCx, fCMK-3-MoCx, CMK-8-MoCx) were characterized by SEM, TEM, XRD, nitrogen adsorption-desorption and XPS. The HER is catalyzed efficiently on the three electrocatalysts, fCMK-3-MoCx shows the best HER electro-catalytic performance with a small onset potential of −0.06 V vs. RHE, a low tafel slope of 66 mV dec⁻¹ and a small over-potential value of 89 mV at 10 mA cm⁻². This excellent performance on HER is due to its high specific surface area and highly ordered mesoporous structure that resulted in excellent proton transport efficiency and high electron transfer rate. Our results provide a new research direction for the application of flat ordered mesoporous structures in catalysis.     

A Gel Polymer Electrolyte with 2D Filler-reinforced for Dendrite Suppression Li-Ion Batteries

Gel polymer electrolytes (GPEs) incorporate both the high ionic conductivity of organic liquid electrolyte and the high safety performance of all-solid-state electrolytes (ASSEs), greatly improving the electrochemical performance of solid polymer electrolytes (SPEs). However, the practical application of GPEs is still limited by inferior interface compatibility, lithium dendrites, etc. Herein, we prepared GPEs based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) further co-blended the two-dimensional sheet inorganic filler hectorite and poly(methyl methacrylate) (PMMA) to improve the mechanical and electrochemical properties of the GPEs. When the content of PMMA and hectorite is optimal, this GPEs have an ionic conductivity of 1.06×10⁻³ S cm⁻¹ and outstanding lithium symmetric cells cycle time of more than 3000 h, indicating that the introduction of filler effectively inhibits the growth of lithium dendrites at room temperature. Moreover, the GPEs adopt a relatively simple solution casting method to provide a fresh idea for the synthesis of high-performance GPEs.     

Charge Density Overcomes Steric Hindrance of Ferrocene Surfactant in Switchable Oil-in-Dispersion Emulsions

A ferrocene surfactant can be switched between single and double head form (FcN⁺C₁₂/Fc⁺N⁺C₁₂) triggered by redox reaction. FcN⁺C₁₂ can neither stabilize an O/W emulsion alone nor an oil-in-dispersion emulsion in combination with alumina nanoparticles due to the steric hindrance of the ferrocene group. However, such steric hindrance can be overcome by increasing the charge density in Fc⁺N⁺C₁₂, so that oil-in-dispersion emulsions can be co-stabilized by Fc⁺N⁺C₁₂ and alumina nanoparticles at very low concentrations (1×10⁻⁷ M (≈50 ppb) and 0.001 wt %, respectively). Not only can reversible formation/destabilization of oil-in-dispersion emulsions be achieved by redox reaction, but also reversible transformation between oil-in-dispersion emulsions and Pickering emulsions can be obtained through reversing the charge of alumina particles by adjusting the pH. The results provide a new protocol for the design of surfactants for stabilization of smart oil-in-dispersion emulsions.